How do you mean ?Deep Learning" playlist featuring slower, more thoroughly explained videos. The possibilities are endless and the more ways you teach the same things, the more people will benefit. Example please.
.
Tough to explain without getting super wordy. This video, however, is a great example of taking the basic act of squeegeeing that we all take for granted and really breaking it down. When i first watched this video i was like, āYes finally! THIS is what Iāve been wishing for!ā
3 Likes
If i made a how to fan video, I would, in addition to doing everything as slowly as possible (at several different speeds, actually), demonstrate every nuance: āthis is what we mean by leading edge. Notice what happens when the leading edge is forward. Now hereās what happens when itās not. Now see how that applies whether youāre squeegeeing side to side or up and down. ā¦ Notice the angle to the glass of the rubber. Different handles are angled differently so you need to change the angle at which you hold it so the rubber touches the glass at this angle. Look at what happens if i use a shallower angle. Now see when i use a steeper one. ā¦ Notice when Iām bringing the squeegee up how it leaves a line. Thatās because the tip didnāt get dry. Now look at this path. See how the tip is traveling in a dry spot? Youāre basically using the glass as a rag to dry your squeegee. See now how thereās no line?ā Etc etc etc
Those were prolly already too many examples, but hopefully that answers your question. For some people that may be overkill. But i think once you have experience you take a lot for granted. A new person has to figure it all out. Many times they donāt even know what it is they donāt know. So, to me, a more thorough explanation with every subtly and nuance is vital. Thereās already a million videos that explain how to fan in 45 seconds. Once youāve watched one you may as well skip the rest.
Itās like how a coach doesnāt just in 20 seconds show you how to kick a soccer ball. He helps you see the subtly of the movement, why you donāt use your toes head on, that your knee needs to be over the ball for maximum power, even where you look and point your arms!
3 Likes
Another masterful example:
Ok thatās it from me. Hope that helps clarify what i mean. 
1 Like
OK that is exactly what said to the point also take note it was short under 4 minutes cut the small talk .
Edit the video to only what needs to be seen.
Also had CC
5 Likes
Also donāt know about dirty little videos. LOL
But have explained very basic of using manly swivel type squeegees.
When learning a technique with any squeegee / scrubber found that you get the basic technique down first.
Take care to get it right if it seems a bit awkward you can add your own certain style to it.
Make easier for yourself.
Speed will come in due time
As you probably noticed that we use modified DIY squeegees based on Wagtail squeegee.
Or even some Wagtail squeegees that have been modified so to be able to use easily.
2 Likes
Yes it a bit of a hit or miss can not please everybody.
Done many videos over the years.
Donāt get that many views.
Except one that put up about 3 years ago.
Gets from 250 to sometimes 500 views a day!!
From all over the world!! (about 140 countries )
Itās a how to video Easy Bending PVC conduit pipe.
Why do you think they still watch it??
1 Like
We want feedback from all you guys ! Thanks . I want to hear excatly what you liked and didnt like from our how to videos . Intro too long check lol
2 Likes
I liked @TheWindowCleanse videos too. Why did you stop making them man?
This is pure conjecture, but itās spring time and he is probably busy busy busy.
2 Likes
Do you mean incomplete information of what ?
Yes. Thatās just a guess.
Luke i also think some āreal lifeā training vids would be nice. Too many videos are cleaning already clean windows. I would like to see some struggle. Otherwise new ppl can get the wrong idea and think it should always be fast and easy.
9 Likes
good point, I never see videos mention one of the simplest things that always overlooked which is once you have completed a window a very quick visual scan of the window. just to take a look as we moved to our next window we always look back on the one we just completed because angle show more than what you can see straight on at times.
Sometimes even on our reoccurring cleanings we have to scrub more in certain areas it is very very common. I never see videos of people actually applying much pressure or scrubbing the glass to clean it itās always a quick once-over with the applicator and squeegee.
A big part in squeegeeing the window is a good initial scrubbing, one canāt do its job without the other
11 Likes
I donāt think a lot of people know they can bend and heat/shape pvc.
I knew I could, have done it in the past, but I learned some things from your videos.
Making pcv bows, potato guns, etcā¦ looks to be pretty popular on youtube.
He_Man can you do a video on pole-fanning with long Sorbo channel and explain how the tip of the rubber doesnāt fold under on the turns? Iām thinking maybe Iām not going deep enough to make the turn; rubber too hard or soft; blade angle or pressure wrong. I can hand-fan a 24" Sorbo, but not having consistant results pole-fanning.
Done a few vids removing hard water stains off windows.
Here we are putting pressure on the glass.
Is this what you mean.
PS: At the end of video click playlist for more videos relating to this.
So found having scrubbing pad on the squeegee channel as in the video.
It actually keeps the squeegee rubber wet when squeegeeing on a pole.
Take note that the scrubbing sleeve is on the under side of the squeegee channel not over the top.
Here two videos showing this.
2 Likes
Thanks He_Man,
I need to modify one of my squeegee and give this a try.
Hey HE_MAN,
What kind of rubber are you using hard or soft?
lol, My first window cleaning job was french panes. Before I even solicited any service. I was being subbed to mow lawns and a client asked if we would clean their windows.
I said yeah, bid it, got the job. Came back with dollar tree squeegees and cut the channel to the french pane size.
I under bid it and only made $25 per man hour. But we had other jobs and did a $380 day. Iāve been hooked since.
1 Like
