Ok I am curious what the process is to do this. One way I did this was to just simply pressure was the gutters the same way we did the house. Spray it with clorox, scrub it with a brush to loosen the dirt, and then spray with the pressure washer. But I have seen the equip they sell here and it looks pretty cool and maybe easier? Let me know! Thanks!
I bought a 30ā ettore pole from here with this brush. I use [URL=āhttp://shopwindowcleaner.com/soaps-chemicals/pressure-washing-chemicals/gutter-grenade-1-gallon.htmlā]gutter grenade. Brush on about 10ā then powerwash it off. If you have your gear set up to softwash, depending on your gpm, you should be able to rinse them without ever touching a ladder
Jay we carry Gutter Grenade and Gutter Zap it can be found here:
Pressure washing, power, soft | Buy Window Cleaning Supplies, Tools, Equipment, Products
and here is a little video we took years agoā¦ thats shows you basically how its doneā¦
Thanks Chris! Looks so easy that way!
iāll try gutter granade too, thanks. Do you ever get those really stained gutters? Does it work on that too, or is there a time to say when?
When do you charge for gutters? always, or just when itās bad?
.
We use gutter grenade. Started out using gutter zap, which works amazing, but then switched after I had the paint peal off 5 feet of someones gutter!
It freaked me out so now we use gutter grenade. Seems like we have to scrub a little harder, but it also seems safer on the anodized aluminum.
Gutter grenade is wonderful. As a pwāer Iāve used them all. Iāve used gutter grenade for the past 3 yrs and wonāt use anything else
ARC Powerwashing
Alex Curry
(O)919.827.4376
(M)919.637.1627
[MENTION=6425]ARCPW[/MENTION] Alex, I tried gutter grenade once and the results were very sub-par. Could it have been a bad batch or maybe it sat in my garage too long before use? Could temp been a factor? I think it was 55-60 degrees when I tried it.
[MENTION=3135]diamondridge[/MENTION]
Iāve read lots of people talk about temps below 60 not working well. So the one time that I had to whiten in those temps, I went in the house and filled my bucket with hot water. Ripped through it fine.
A lot of factors come into gutters. Sometimes they are not going to come clean or as clean as you thought they would. Sometimes it could be the mix was not strong enough. If you have hot water use it in the color temps. Anything below 55 with cold water and cold aluminum isnāt going to work that well.
ARC Powerwashing
Alex Curry
(O)919.827.4376
(M)919.637.1627
I bet it was the temp that was the problem
[MENTION=3135]diamondridge[/MENTION]
try gutter brite. Works great. Much better than f-13. Less expensive too.
Where do you buy gutter brite? Ill try it.
[MENTION=1719]birdsbeware[/MENTION]
http://www.thegrimescene.com/forums/look-whats-new/11890-new-gutter-brite.html
Edited link. The other one was way too expensive. This is the correct product.
Thanks! You da man!
Weāve had success using Sprayway and magic erasers.
Sent from my iPhone using Tapatalk
With shipping this stuff is like $88/gallon
Seriously?
I didnāt realize how many āgutter briteā brands are out there. This is the stuff:
http://www.thegrimescene.com/forums/look-whats-new/11890-new-gutter-brite.html
