I just tried out the WFP today, the TDS is at 000ppm so all good there. I did the windows but it spotted near the top of the window and I got a a few runs down the window.
Can someone give a detailed explanation of how to solve that or proper technique for the top portion of the window.
Also if you could go over french pane as well for WFP.
leave before it dries…
Seriously just clean like you would and / or just clean the top area and let it dry mostly. Then, clean the glass area without touching the top of the frame. I have noticed that happening sometimes on painted frames.
Here you go.
[ame=“How to Clean A Window With WFP Pure water - YouTube”]YouTube - How to Clean A Window With WFP Pure water[/ame]
I did it just like he shows here but it dried with spotting at the top, about the top two inches of glass.
I was thinking that there was dirt leaking out of the rubber at the top.
mhpoole said “just clean the top area and let it dry mostly. Then, clean the glass area without touching the top of the frame.”
This seems like it would work but that adds up to a lot of back pedaling. Cant you do like shown here in the video and move on to the next window. It seems like he is scrubbing the top where the rubber meets the glass, don’t you think he would get spotting as well and even some runs maybe?
Those windows are cleaned on a monthly basis. Count on cleaning the windows with the wfp the first time a lot longer. It takes a while for all the soap & dirt to leach out of the frames & seals. Some wc’ers in the UK put out a leaflet to tell the owners it may take up to 3 cleans for the windows to become fully clear. This is not an option for me or for those in the N. American market (I presume). I got round this by pre-scrubbing with GG4 & a porcupine & wfping the window before the solution dried. I found this used less water & was ultimately quicker. If you have been using a dish washing solution before - this will take a lot longer. Changing over from GG4 is a breeze.
I’d love to release the new brush head that will solve most of these problems - but finance is stopping myself & UK partner from getting this off the ground.
[SIZE=“7”]YO SQUEEK!![/SIZE]
Mike, all this stuff sound familiar? I am pretty sure I can go on tuesday, dont worry man its easy, I will show you on tuesday. Just call me on Monday and give me the address, I should be up that way anyhow.
If the windows have left over soap or are new they will do this the frist time.
You just have clean them with a hog hair brush and fan jets because they work better.
When you rinse the second time stay a foot away from the top of the window will help.
Take your time to rinse is the key.
PhilWe will have an adjustable 85 4x6 4x7 4x8 SimPole
Retail for $3,675.00 on sale for testers for $2,975.00
10x6 60’ for retail $2,675.00 on sale for $1,975.00
3x6 1x2 1x4 1x3 sectional for retail $1,975.00 on sale for $1,375.00
All 3 for $6,325.00 -$725 =$5,600.00
get them from WCR!
