Does anyone know if there’s a way to use the ledge-eze with a liquidator 2.0? I’ve been using the 1.0 and removing a clip to slide it on. But on the 2.0 the clips are fixed. Do i just need to loosen the clamping a bit more so it can open enough to accommodate the channel?
1 Like
@anon35812390 @luke3636 ^^
I would give that a whirl I was seeing if I still had a ledge eze around to try it, but I believe my last employee has it…lol
I think you should be able to loosen it up enough to get the channel in.
1 Like
You can do it one of two ways. Loosen/disassemble the handle and reassemble around the channel, or you use a little flat bladed screwdriver and wedge under the clip where it click into the channel, ease it up and over the cut and then slide off as normal…
1 Like
So the ends do come off with help… Thanks for chiming in @anon35812390
1 Like
MOERMAN - LIQUIDATOR 2.0 - TOOL FEATURES - YouTube …about 50 seconds in …
1 Like
I figured they would come off with some help. Thanks for sharing the link.
Looks like they do come off will some help! Lets us know how it works out Daniel.
Wow, funny thing is I’ve posted a link before to that exact same video and have watched it several times. Totally forgot that they showed how to take the clips off. 
3 Likes
Like Eric said the ends will still come off. I use pliers to remove them then slide it through . Presto
3 Likes
