Video shows how we applied One Restore on window having calcium build up from sprinklers.
2 Likes
Great video. The manufacture suggest no rubbing just apply with spray bottle or pump sprayer and rinse with garden hose. The real key to this product is the rinse so the manufacture suggest a 4 gpm rinse PW or most water sources produce 4 gpm so a garden hose will work.
Also noted they suggest use at full strength which is not necessary.
Using the 1 to 3 water mix works just as good. (Get 4 gallons)
Using sprayer is not an option to applie on the glass ether chemical become airborne.
First you breath in the over spray, goes on the skin, cloths etc and it this case it would go on the plants.
So we just use squirt bottle contains the chemical in one area.
Rinsing the One Restore off as explained in video use old scrubber sleeve saturated with cleaning solution flood the glass then squeegee off.
Also like to keep the tools that we use separated from the other WC tools after hosing them down clean.
2 Likes
Above all no matter what chemicals you are using, you should always exercise caution and wear appropriate clothing accompanied by goggles and gloves etc.
Protecting yourself from all chemicals should always be #1.
2 Likes
As One Restore is more of a cleaning agent and is the first one use in test area.
If it hasn’t cleared the area enough then we try CC550 on test area.
If this works just remember to still use the One Restore first the clean al the grease and dirt off the glass.
As CC550 is not a cleaning agent.
Applie CC550 in the same way that we did with the One Restore.
However if this does not remove the stain then you may have to revert to using a machine.
Know some people may say just use machine which can be time consuming.
All you have to do is in a small test area where it is the worst to see if the chemicals work takes a minute or so to do.
Hope this help some people.
