I am new to soft washing and I have had some good results so far.
I have a log house that I am cleaning soon and was hoping to soft wash it.
Is there anything I need to know before I start?
eg.)
special mix ratio or things not to do?
Any imput would be great 
I have cleaned a few stucco homes and a painted wood sided house. Just want to know if there is anything different for non painted yet sealed wood timber homes.
Question: what mix did you use on the stucco
Homes? I did a stucco home and had rough results with stains that wouldn’t come off.
I used a 50/50 mix and I had my downstream set to fully open. Used a fair bit of chemical and it seemed to look good. I did not have any stains as you may of had.
[quote="“Mister410,post:3,topic:17995”]
I used a 50/50 mix and I had my downstream set to fully open. Used a fair bit of chemical and it seemed to look good. I did not have any stains as you may of had.[/QUOTE]
Did you use 12% sh?
With Stucco You May have to up the 12% and use a little pressure ( x jet ). that has been my experience & worked out good.
I shy away from log houses at this point. I’d like to see what the veterans suggest as well.
just did a window cleaning job at a log house and he said a company came in and blasted the logs w/ ground up corn cob to take it back down to the wood and then resealed it.