I’m gettin some rhino hose
Yes. Not sure why I would need to know what the TDS coming out of my first tank is. It’s the polishing tank that matters.
So you can tell if your first tank is spent and your polishing tank is doing all the work
This space for rent!
Hi there
The standard HM DIGITAL 2-input meter - it doesn’t matter - they are cheap and easy to install…
If you are using Mixed Bed Resin, it is usually a 60/40 mix.
Chances are therefore that one side will fail first - hence you will see it creep a little - then jump to either 40 or 60 % of your local TDS, then fail completely and start delivering a TDS higher than the TDS IN.
The safest answer is - anything over TDS 010 has the POTENTIAL to cause a spot that is visible to the human eye…
The smart (not peak season) answer is - take your tank that is delivering TDS 010 or higher and clean your home windows with it… See at what point it spots?
My point is - with this set up, you don’t need to rush and change the resin that night - you have plenty of time - just avoid the first tank failing completely if possible…
Sent from my iPhone using Window Cleaning Resource
This is an easy answer :
If you are working all day, would you rather find out that your total resin system has failed? Or that it is partially failed, but completely is ok for days to come.
I am a motorbike rider I’m a country with very long distances between highway service centres. When the main tank is empty, we switch to reserve and keep riding!
Sent from my iPhone using Window Cleaning Resource
Just a follow up…
You can see that the units can be filled with loose resin. (edit) Read the description as it says either form will work.
1 Like
is there a big difference in virgin resin vs recycled does it produce less pure water than virgin
Eric
Yes - it’s not that Recycled cannot be brought close to new - it can, but it’s cost prohibitive…
The higher the efficiency of the resin, the higher the cost.
From all my readings and conversations, the commercially viable ‘sweet spot’ is between 60-70% re-charged.
Add to that, your time in changing 3 times to every Virgin resin 2 times, and your choice will be clear.
I hope that helps!
Sent from my iPhone using Window Cleaning Resource
[MENTION][/MENTION]PerryTait i am looking to buy two reach it mini poles wanted to know if it has a lot of bend in it when fully extended or when you ad the to extension poles. Most of the Poles i have used are not good the most recent pole i used was a simpole and it was no good after 25 feet. when i added the two extra poles it was useless. had to take turns using pole until a different pole until we got low enough for the simpole to work.
also do you sell the pole handles that connect to pole. i think i saw them somewhere in the forum
thanks
Eric
MINI4 / PRO4 Interchange Guarantee
Hi Eric
Thanks for your enquiry - it’s a very unique aspect of the Reach-iT Design that you are asking about.
Here’s some background fill-in :
We fully promote that you use the 80:20 RULE to decide the right combination for you - that is - if 80% of the glass you clean is 2 storey and below, then you should get a 2 storey pole that can be extended to reach the other 20%.
So, assuming this is your attraction to the Reach-iT MINI, we concur it is the best pole for the job.
If you are never going to clean over 45ft, you can get the Reach-iT MINI-XT (8FT 4" extension) but for maximum extension, you can get the PRO-XT ((11FT 4"extension)
The MINI and MINI-XT are 100% Carbonfibre while the PRO4 and the PRO-XT are 100% High Modulus Carbonfiber, which means they are noticeably more rigid.
Now to apply it to your situation and experience :
We have many, many Reach-iT MINI users with 2 x XT’S, and even a few with 3 x XT’S, so I am completely confident that you will not be disappointed… But let me assure you further - if you choose 1 x MINI4 and it does not perform as you are expecting, then within 7 days, you can swap it for a PRO4 and $99.
This takes the risk out of the decision for you.
Remember, if you buy 2 x MINI2, any XT’S you get are interchangeable with all other Reach-iT poles… So 2 x XT’S may be enough - one with each MINI, and two XT’S together for the 4 storeys job!
Reach-iT is the only brand that only sells 100% Carbonfiber Poles for Professionals.
Sent from my iPhone using Window Cleaning Resource
