Guys, I am still experiencing water lines when I pull down?
When my rubber is getting older I will experience this, or if I am having an off day. I always go from right to left, and after the first pull, I will give my squeegee a slight tilt with the right side being, ever so slightly lower. usually helps.
Water will always flow to the trailing edge. With straight pulls, keep the blade with a slight downward tilt toward the cleaned edge.
With side to side fanning, the blade tip always inclines toward the direction of travel.
Unless using a Moerman Liquidator, use a 45 degree downward angle when cleaning against the frame to minimise water residue (‘dive-bombing’).
