Getting started...Gear setup

Yeah that’s pretty much my setup idea…lol

Be sure to experiment with boab on the left too. I had mine on the right but switched to the left and like it way better. With that set-up i have the mop on the left and squeegee on the right allowing for ultrafast mop then squeegee action, or, better yet, easier two-handed fanning.

2 Likes

yeah thats how mine is too. So much smoother instead of reaching across the body.

I expect plenty of experimenting. Thats where alot of my excitement comes from. Technique, gear setup, selling speech etc…now to just move…got a couple more weeks…

1 Like

Sounds like you’ll be hitting the ground running. Right on!

1 Like

You should throw this pic and description of your setup in this thread

1 Like

Understand the point, but isn’t there risk for dripping from the squeegee? You don’t want that in people’s home.

It did take some getting used to at first but now drips are no longer a problem. (Plus I think he’s focusing on storefront first.)

Yes i plan to start with commercial/storefronts…

Hey guys so i JUST got in my Ettore 18" backflip. Tried cleaning a window using straight pulls and i noticed there is 1/4" or so streaks along the edges…why? What am i doing wrong?

Read this:

2 Likes

I read a bunch of threads. Tho i cant seem to find an answer to why there is a 1/4" strip of still wet window along the sides while im doing straight pulls. The rubber sticks out of channel about size. But i think its suppose to be that way…so cant figure out what the issue is…

Is that where detail ing comes into play? Cause i assume i should be able to straight pull without leaving the edges wet…

are you holding the squeegee perfectly horizontal? or at a slight pitch downward away from the edge?

I tried both…same result

If you mean along the frames, yes, it’s normal. To reduce this you can divebomb the edges (search that) or if they’re maintenance cleans you can not mop the 1/4" along the edges. The water on the squeegee will be enough to clean the edges. Also, if you let the squeegee ride up onto the seals, it’s lifted slightly and will miss the glass, so be mindful of that. Other than that, correct, that’s the point of detailing.

2 Likes

Part of it too is just being familiar with your tool, knowing exactly how much pressure to put on the blade as a whole, and developing your skill to the point where you can “feel” the window seal through the pole and squeegee.

When you start out, you will detail a bit at the edges and that’s normal. As you progress you will probably notice that the detail beads shrink gradually from 1/4" to 1/8", and then in some cases to even less than that.

So shoot for minimal detailing, but don’t get discouraged if there is a bit of water on the edge of your glass for now.

6 Likes

Well said @Samuel

2 Likes

Best post on the forum for newbies! Thanks

2 Likes

Thank you very much Derrick.

So last night i finally got a chance to practice cleaning windows. The motel im living at let me clean the office windows to practice. I learned a ton just cleaning the same 2 windows over and over. Im currently using the backflip. Not a bad way to start. And loving it. I think i found my nitch. So fun. Now i have the confidence to go talk to people about actual work.

Question: Does the Ninja handle hold Sorbo Cobra channels?

5 Likes